Bluenergy Yale Ignite 5W-30 SQ ILSAC GF-7A

Bluenergy Yale Ignite 5W-30 SQ ILSAC GF-7A

A fully synthetic, fuel-efficient engine oil designed for modern petrol, hybrid, and stop-start engines. It meets API SQ / ILSAC GF-7A standards and delivers excellent performance, extended drain intervals, and improved fuel economy. The advanced formulation provides strong protection under severe conditions and helps prevent LSPI in turbocharged, TGDI, supercharged, and other modern engines.

 

Category:

Description

Features & Benefits

  • Improved fuel economy & easy cold starts due to good fluidity at low temperatures.
  • High resistant oil film even at high engine operating temperatures.
  • Excellent detergency and dispersancy, reduces sludge formation which improves engine cleanliness.
  • Excellent oxidation & thermal stability, helps in extending oil drain intervals.
  • Superior wear protection for greater engine reliability and performance.

Specifications

Bluenergy Yale Ignite 5W-30 SQ ILSAC GF-7A meets or exceeds following International and Builder specifications:

  • • API: SQ, SP, SN Plus, SN, SM, SL, SJ
    • API (Fuel Economy): SQ Resource, Conserving, SP Resource Conserving, SN Plus Resource Conserving, SN Resource Conserving
    • ILSAC: GF-6A, GF-7A • GM: 6094M
    • Fiat: 9.55535-CR1 • Chrysler: MS-6395
    • General Motors: dexos™ Gen 3
    • Ford: WSS-M2C946-A, WSS-M2C946-B1,
    • WSS-M2C929-A, WSS-M2C961-A1
    • China: BYD, Geely, Chery, GWM, Haval, Changan
    • Japan: Honda, Toyota, Nissan, Mazda, Lexus
    • Korea: Hyundai, Mitsubishi, Kia, Genesis

Application

Bluenergy Yale Ignite 5W-30 SQ ILSAC GF-7A is suitable for use in GM, Ford, BMW, VW, Audi, Renault and Mercedes Benz.

  • Automotive gasoline and diesel engines.
  • Passenger cars, SUVs, light trucks and vans.
  • Moderate duty LPG vehicles.
  • Suitable for all petrol engines with multi-valve & turbo types and with or without catalytic converter.
  • Naturally aspirated or turbo-charged diesel engines in cars and light vans.
  • Fuel injected or indirect injection diesel engines fitted with blow-by recirculation systems.

Typical Characteristics

Bluenergy Yale Ignite 5W-30 SQ ILSAC GF-7A Test Method Units 5W-30
Density @ 15 0C ASTM D 4052 gm/cc 0.848
Viscosity @ 100 0C ASTM D 445 cSt 10.5
Viscosity @ 40 0C ASTM D 445 cSt 58.65
Viscosity Index ASTM D 2270 – 170
Pour Point ASTM D 97 °C -39
Flash Point (COC) ASTM D 92 °C 230
Total Base Number ASTM D 2896 mg KOH/g 7
Phosphorous ASTM D 4951 % wt 0.7
CCS Viscosity ASTM D 5293 cP 5150 @ -30 °C

The above figures are typical of blends with normal production tolerance and do not constitute a specification.

Protect the Environment
Take used oil to an authorized collection point or to be recycled. Do not discharge used or new oil into drains, soil or water.

Additional Information
Based on available information, this product is not expected to produce adverse effect on health when used for the Applications referred to above and the recommendations provided in safety data sheet are followed. guidance on health and safety is available on the appropriate material safety data sheet(MSDS) which can be obtained from www.bluenergylubes.com

Related products